Signs Your Washer Isn't Spinning Properly

If your LG washer starts the cycle but fails to spin the drum, or spins but with clothes still soaking wet, these are clear red flags. You may also notice:

• The washer is making unusual shaking sounds or loud thumps.
• It stops mid-cycle without spinning.
• The spin light is on but there's no movement.

Common Causes of No Spin in LG Washers

Faulty Lid or Door Switch

LG washers include safety switches that stop operation if the lid or door isn't properly closed. A broken switch prevents the spin cycle from starting.

Worn Drive Belt or Broken Motor Coupler

Over time the belt may stretch, or the motor coupler may break - both will stop the drum from spinning. If you hear the motor running but the drum stays still, this could be the cause.

Malfunctioning Control Board or Timer

Modern LG washers rely on complex electronics. If the control board or timer is defective, the spin cycle may not receive the signal to begin.

Unbalanced Load or Over-loading

Sometimes the cause is simpler: putting too many heavy items into the washer or mixing large items with many small ones can prevent the machine from spinning.

Step-by-Step Quick Checks You Can Try

Before calling a technician, you may want to:

• Ensure the washer is level on the floor.
• Remove a few items and try a smaller load.
• Verify the lid or door closes properly and the latch engages.
• Check for any visible error codes on the control panel.

If these don't restore the spin function, the issue likely requires professional service.

Preventive Maintenance To Avoid Future Spin Problems

To reduce the chance of spin failure, follow these easy tips:

• Don't overload the washer - stick to manufacturer's load guidelines
• Clean the gasket and check the door/lid seal regularly
• Keep the washer level and stable to prevent imbalance
• Run a maintenance wash once a month to reduce wear and build-up